Commercial

Displaying 11 - 20 of 34

Epoxy meets airbus standards for flame retardancy and gas emissions

Epoxy meets airbus standards for flame retardancy and gas emissions
  Formulated to meet rigorous Airbus specifications, Master Bond EP93FRHT passes the twelve second vertical burn test per AITM 2.0002B and Section 7.1.2 of ABD0031, Issue F; the smoke emission test per AITM 2.0007B, Issue 3 in the flaming mode and Section 7.3.2 of ABD0031, Issue F; and the toxic gas emission test per AITM 3.0005, Issue 2 in the flaming mode and Section 7.4 of ABD0031, Issue F.
5th June 2017

Aerospace engineering firm cuts costs with high efficiency compressors

Aerospace engineering firm cuts costs with high efficiency compressors
  BOGE is saving an aerospace engineering and treatment company at least £18,000 a year by installing two of its high efficiency compressors.
16th May 2017

Porter Airlines increases fuel efficiency with SkyBreathe

Porter Airlines increases fuel efficiency with SkyBreathe
    Porter Airlines has pursued its commitment to sustainable development by signing a partnership with OpenAirlines to use its innovative fuel efficiency platform SkyBreathe.
12th May 2017


LynxOS-178 offers portability for safety critical software designs

Lynx Software Technologies has announced LynxOS-178 2.2.4, a new version of its widely deployed DO-178 certified RTOS. Supporting open standards such as FACE (Future Airborne Capability Environment), POSIX (Portable Operating System Interface) and APEX (ARINC 653 APplication EXecutive), LynxOS-178 offers true portability for safety-critical software designs.
27th April 2017

Aircraft motion systems improved with compact actuators

Aircraft motion systems improved with compact actuators
A new range of compact and lightweight electromechanical actuators designed specifically to meet the requirements of aerospace applications. Fully certified to BS EN 9100, the industry-recognised standard for quality and risk management for the aviation industry, the new actuators can be integrated into new aircraft designs or retrofitted into existing aircraft to improve functionality while reducing the size and weight of on-board motion control systems.
26th April 2017

IATA regulations for the shipping of lithium batteries introduced

The International Air Transport Association (IATA) has changed its IATA DGR (Dangerous Goods Regulations) concerning the shipping of lithium batteries. Since January 1st 2017, lithium batteries that were previously not covered by labelling requirements have become partially subject to them.
11th April 2017

Software safeguards against data theft and service attacks

Software safeguards against data theft and service attacks
The launch of Extreme's AirDefense advanced wireless security software package, specifically targeted towards the aviation market has been announced by Kontron. The AirDefense software runs in conjunction with the Kontron Cab-n-ConnectT A100 cabin wireless access point (CWAP), which received FAA PMA flight approval in September 2016.
5th April 2017

Kontron's inflight connectivty system selected by Gogo

Kontron has announced that Gogo will deploy Kontron's next gen MODMAN (Modem Manager) unit in its 2Ku IFC system in both retro-fit and OEM line fit programmes.
5th April 2017

Airframe assemblies improve WiFi access on flights

Airframe assemblies improve WiFi access on flights
Starting this summer, GORE Microwave Sealed Airframe Assemblies will be used to improve WiFi internet access on European short-haul flights. The European Aviation Network is a next-gen platform from mobile satellite communications provider Inmarsat that will provide a true in-flight broadband experience for millions of airline passengers across Europe.
31st March 2017

The HandySCAN 3D scanner now certified by Airbus

The HandySCAN 3D scanner now certified by Airbus
It has been announced that Creaform’s flagship metrology-grade portable 3D scanner, the HandySCAN 3D, has been certified by Airbus and will be added to the company’s next Technical Equipment Manual (TEM) release. This certification comes following the recognition of HandySCAN 3D’s specifications by the French National Laboratory for Metrology & Testing (LNE).
30th March 2017


Commercial documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

AIRTEC 2017
24th October 2017
Germany AeroExpoPark
Future Armoured Vehicles Survivability 2017
14th November 2017
United Kingdom London
UK Security Expo 2017
29th November 2017
United Kingdom London Olympia