Laser technique identifies the makeup of space debris

Posted By : Enaie Azambuja
Laser technique identifies the makeup of space debris

Aerospace engineers from MIT have developed a laser sensing technique that can decipher not only where but what kind of space junk may be passing overhead. For example, the technique, called laser polarimetry, may be used to discern whether a piece of debris is bare metal or covered with paint. The difference, the engineers say, could help determine an object’s mass, momentum, and potential for destruction.

“In space, things just tend to break up over time, and there have been two major collisions over the last 10 years that have caused pretty significant spikes in debris,” says Michael Pasqual, a former graduate student in MIT’s Department of Aeronautics and Astronautics.

“If you can figure out what a piece of debris is made of, you can know how heavy it is and how quickly it could deorbit over time or hit something else.” 

Kerri Cahoy, the Rockwell International Career Development Associate Professor of aeronautics and astronautics at MIT, says the technique can easily be implemented on existing groundbased systems that currently monitor orbital debris.

“[Government agencies] want to know where these chunks of debris are, so they can call the International Space Station and say, ‘Big chunk of debris coming your way, fire your thrusters and move yourself up so you’re clear,’” Cahoy says. “Mike came up with a way where, with a few modifications to the optics, they could use the same tools to get more information about what these materials are made of.”

Pasqual and Cahoy have published their results in the journal IEEE Transactions on Aerospace and Electronic Systems.

The team’s technique uses a laser to measure a material’s effect on the polarisation state of light, which refers to the orientation of light’s oscillating electric field that reflects off the material. For instance, when the sun’s rays reflect off a rubber ball, the incoming light’s electric field may oscillate vertically.

But certain properties of the ball’s surface, such as its roughness, may cause it to reflect with a horizontal oscillation instead, or in a completely different orientation. The same material can have multiple polarisation effects, depending on the angle at which light hits it.

Pasqual reasoned that a material such as paint could have a different polarisation “signature,” reflecting laser light in patterns that are distinct from the patterns of, say, bare aluminum. Polarisation signatures therefore could be a reliable way for scientists to identify the composition of orbital debris in space.

To test this theory, he set up a benchtop polarimeter — an apparatus that measures, at many different angles, the polarisation of laser light as it reflects off a material. The team used a high-powered laser beam with a wavelength of 1,064 nanometers, similar to the lasers used in existing ground-based ladars to track orbital debris.

The laser was horizontally polarised, meaning that its light oscillated along a horizontal plane. Pasqual then used polarisation filtering optics and silicon detectors to measure the polarisation states of the reflected light.

In choosing materials to analyse, Pasqual picked six that are commonly used in satellites: white and black paint, aluminum, titanium, and Kapton and Teflon — two filmlike materials used to shield satellites. “We thought they were very representative of what you might find in space debris,” Pasqual says.

He placed each sample in the experimental apparatus, which was motorised so measurements could be made at different angles and geometries, and measured its polarisation effects.

In addition to reflecting light with same polarisation as the incident light, materials can also display other, stranger polarisation behaviours, such as rotating the light’s oscillation slightly — a phenomenon called retardance. Pasqual identified 16 main polarisation states, then took note of which efffects a given material exhibited as it reflected laser light.

“Teflon had a very unique property where when you shine laser light with a vertical oscillation, it spits back some in-between angle of light,” Pasqual says. “And some of the paints had depolarisation, where the material will spit out equal combinations of vertical and horizontal states.”

Each material had a suffiiciently unique polarisation signature to distinguish it from the other five samples. Pasqual believes other aerospace materials, such as various shielding films, or composite materials for antennas, solar cells, and circuit boards, may also exhibit unique polarisation effects.

His hope is that scientists can use laser polarimetry to establish a library of materials with unique polarisation signatures. By adding certain filters to lasers on existing groundbased ladars, scientists can measure the polarisation states of passing debris and match them to a library of signatures to determine the object’s composition.

“There are already a lot of facilities on the ground for tracking debris as it is,” Pasqual says. “The point of this technique is, while you’re doing that, you might as well put some filters on your detectors that detect polarisation changes, and it’s those polarisation features that can help you infer what the material is made of. And you can get more information, basically for free.”

This research was supported, in part, by the MIT Lincoln Scholars Program.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

DSEI 2017
12th September 2017
United Kingdom ExCeL, London