Test

Displaying 1 - 10 of 56

Accurate 3D flight visualisation and measurement launched

Accurate 3D flight visualisation and measurement launched
  Specialised Imaging reports on applications for which its SI Tracker2 system has been used to precisely correlate high speed video data with 3D visualisation and measurement information. 
13th September 2018

Pulse current injection compliance at first time of asking

Pulse current injection compliance at first time of asking
The well-established procedure for checking compliance of a HEMP filter with the Mil-Std-188-125 specification is to inject a very high current pulse into the front end of the filter and monitor the residual current flowing through. Such Pulse Current Injection (PCI) testing is conducted independently of the filter manufacturer, by trusted test houses utilising specialist and often proprietary equipment. No test house in Europe offers such commercial PCI testing, and filters are most commonly tested in the USA.
12th September 2018

Videoscopes enable images to be taken in difficult locations

Videoscopes enable images to be taken in difficult locations
Two rugged diagnostic videoscopes from Fluke that target maintenance engineers and other professionals are in stock at distributor RS Components. They enable equipment inspections and diagnose problems in a wide variety of industrial applications. The new rugged Fluke DS701 and DS703 FC videoscopes offer high resolutions of 800 x 600 and 1200 x 720, respectively.
9th September 2018


Helping maximise aircraft test time efficiency

Helping maximise aircraft test time efficiency
HBM has announced its latest free webinar; 'Maximising Test Time Efficiency in Aircraft Testing', which will take place on 18th September 2018 at 9am (GMT). As different test types such as structural, functional and wind tunnel testing grow, the need to both reduce the setup times and increase the efficiency of testing time is essential for economical processing.
13th August 2018

AS9100D certification achieved by innovative test solutions provider

AS9100D certification achieved by innovative test solutions provider
It has been announced that Marvin Test Solutions, provider of innovative test solutions for military, aerospace, and manufacturing, has received the Certificate of Registration to AS9100D and ISO 9001:2015 through the International Standards Authority (ISA). 
11th July 2018

On-ground testing for airborne GX solutions

On-ground testing for airborne GX solutions
The aviation industry is rapidly increasing its digitisation and connectivity efforts to improve passenger experience as well as to lower cost of operation. GateHouse Telecom, has now developed new technology customised for airborne GX solutions that has pulled testing new applications down to earth.
28th June 2018

University's 5G mmWave test platform gets help from NI

University's 5G mmWave test platform gets help from NI
5G is having and will continue to have an impact on wireless communications. It has spurred the Warwick Manufacturing Group (WMG) at the University of Warwick to upgrade its lab to include 5G mmWave technology.  This advance has been possible because of a WMG Centre HVM Catapult award and equipment collaboration from NI (National Instruments).
14th May 2018

Test system for Dream Chaser flight control system

Test system for Dream Chaser flight control system
SAKOR Technologies has announced that it has supplied a test system to Southwest Research Institute (SwRI) to be used to test the flight control system for the Dream Chaser spacecraft. Dream Chaser is a lifting-body, reusable, crewed or uncrewed horizontal-landing vehicle. It is owned and operated by Sierra Nevada Corporation (SNC) and is designed as a space utility vehicle for low-Earth orbit.
24th April 2018

Waveform portable test unit allows for phase angle synchronisation

Waveform portable test unit allows for phase angle synchronisation
Transient Specialists has announced that they will be offering a discount price on the AVI 3000 for the month of May. This all-in-one 6 waveform portable test unit which allows easy on-site testing to full level 3 threat under all load conditions. This product is suitable for testing to DO 160 Sec. 22 Level 3 and Mil Std. 461 CS 117 Waveforms 1, 2, 3, 4, 5A, and 6.
17th April 2018

Vapor-sealed cables selected for network test lab

Vapor-sealed cables selected for network test lab
W. L. Gore & Associates (Gore) has announced that GORE Microwave/RF Assemblies, 7 Series were installed in the SmartSky Networks King Air B200 airborne test platform developed to optimise their new air-to-ground network and test future technologies and applications. Gore engineers worked closely with SmartSky to design and provide high performance, vapor-sealed microwave/RF assemblies in a very short timeframe, allowing SmartSky to continue to stay on schedule with the deployment of the aircraft test resource.
10th April 2018


Test documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

International Security Expo 2018
28th November 2018
United Kingdom London Olympia